Bearings & azimuths
Two ways to write the same direction. Azimuths are easier for computing; bearings are what you will read on most maps and deeds.
Azimuth
An azimuth is the angle clockwise from north, 0° to 360°. Because it is a single number with no letters, it drops straight into the coordinate formulas: latitude = L·cos Az, departure = L·sin Az, and the signs come out right in every quadrant.
Bearing
A bearing is the acute angle (0°–90°) from north or south toward east or west: "N 37°15′ E". The first letter tells you which end of the meridian you measure from, the last letter which way you turn. To convert, find the quadrant and use the table in the sketch above.
Back directions
The same line walked the other way: add or subtract 180° to an azimuth, or swap both letters of a bearing (N 37°15′ E ↔ S 37°15′ W). Deeds often describe a boundary in one direction and the adjoiner's deed in the other, so the bearings differ only by the letters.
Angles between lines
- Angle to the right: turned clockwise from the backsight to the foresight. Forward azimuth = back azimuth of the previous line + angle right.
- Deflection angle: how far the new line bends from the prolongation of the previous one, labeled R or L. Deflection = angle right − 180°.
- Interior angles of a closed figure with n sides sum to (n − 2)·180°.
Degrees, minutes, seconds
1° = 60′ and 1′ = 60″. To decimal: 37°15′40″ = 37 + 15/60 + 40/3600 = 37.26111°. Carry carefully when adding: 89°59′50″ + 0°00′20″ = 90°00′10″. One second of angle is about 0.005 ft of offset at 1,000 ft.
Basis of bearings
Every survey states what its north is — grid north of a state-plane zone, a record line between two found monuments, or an assumed direction. Bearings from two surveys with different bases can disagree by a constant rotation; compare the same line on both to find it before combining them.
Try it in the calculators
- Open the calculator: Bearing / azimuth converterTry an exampleAzimuth 341°12′30″ → bearing
- Open the calculator: Inverse / COGOTry an exampleInverse of leg B-C from its published dN/dE
When not to use: this guide teaches the method. It is not a survey standard and does not replace your state's minimum technical standards for surveys or the project specifications.
Original explanations written for this site. Plane-surveying fundamentals only — not exam questions, and not a substitute for a surveying text or your agency's survey manual.